Things to consider while painting your Home’s Interior
When it comes to giving your home a fresh look, painting the interior walls of your home is the way to go. However, having a checklist to create the right conditions before the commencement of wall painting work is essential to ensure you achieve a visually pleasing and long-lasting finish.
Along with the right condition, the right quality and quantity of paint are also of prime importance. With an online paint calculator from PaintKart, you can calculate the right amount of paint and avoid being left over with surplus paint or falling short of paint to complete your wall painting project. PaintKart is the go-to place to buy wall paints online in India. Buy premium quality from Asian Paints Online and give a luxurious appeal to your home.
One factor that often gets overlooked is the effect of weather on paint. Especially high humidity during the monsoons and low temperatures during the winter months can adversely impact your home painting project. Most people believe that the weather outside has no impact whatsoever on interior painting work as the paint is being applied in a covered area and is insulated from the impact of the weather outside. However high humidity does not allow the paint to dry easily thereby increasing the drying time tremendously and hence the time between coats increases. This could lead to the painting work taking almost twice the amount of time to complete for the same quantum of work than it would have taken in dry weather. In this blog post, we will explore the potential pitfalls of painting your home’s interior and why it’s best to wait for better weather conditions that are more conducive for applying paint. We will also go through a checklist that needs to be made before painting your home.
- Increased Humidity
Humidity is the factor that affects the paint. Clear skies and dry weather conditions are ideal for interior painting. However, even on a lovely day when the sun is shining, it is imperative to check the humidity levels before painting. Depending on the type of paint being used, the appropriate relative humidity for paints varies, but as a general rule, aim for a relative humidity level between 40% and 50%. Days that are gloomy and rainy might result in too much moisture in the air, preventing the paint from drying properly. Also on winter days, the moisture in the air is relatively more. High humidity levels make the drying process of paint longer and this has an unfavourable effect on the overall outcome of the painting work carried out. As a result, the recently painted wall may develop bubbles and blisters, and the paint may remain wet for several days. This would compromise the wall’s overall appearance.
It’s crucial to pay attention to the environment’s moisture levels while painting to avoid these problems. If painting work needs to be done on a priority basis and it’s not possible to wait for more favourable and dry conditions a dehumidifier could be a possible solution to this problem, it will dry the paint by removing the excess moisture from the air. If you are looking to buy paints online in India PaintKart is the better option for you.
- Poor Ventilation
Proper ventilation is another important aspect when it comes to interior paint. Opening windows and providing fresh air from outside can be an option but rain or cold weather may make it a little difficult, this can trap moisture inside a room which can hinder the drying process. Hence one should make sure there is proper ventilation while painting but at the same time should consider the weather conditions too.
- Other Conditions
Proper surface preparation is crucial for achieving a smooth and flawless paint finish. However, on winter or rainy days, the increased moisture in the air can make it challenging to prepare your walls adequately. Moisture can prevent paint from adhering correctly to surfaces, causing problems like peeling or flaking paint in the future. Additionally, damp walls may require longer drying times, making it harder to complete the necessary sanding, filling, and priming tasks effectively.
Natural light plays a significant role in evaluating paint colours and their appearance on your walls. Rainy and cold days tend to be darker, and the absence of sunlight can distort the way the colours look indoors. Without proper lighting conditions, it becomes difficult to accurately assess the paint colour you have chosen. This can result in disappointment and the need for additional touch-ups or repainting after the weather clears up.
Check List
- Inspect the original wall & cover the floor and furniture
It is mandatory to inspect the surface which is the masonry wall and make sure it is even and that there are no undulations, cracks, or pin holes. If there are cracks or pin holes, these cracks must filled using crack filler from Asian paints. The surfaces are even and free from excess dust, dirt, grease, or any other substance that adversely impacts adhesion. Also, it is important to cover the floors and furniture with paper or plastic to prevent any damage to them during the painting process. It’s important to understand that paint stains are difficult to remove and in the process of removing the stains the floor tiles and furniture can get damaged. Hence covering the floor and furniture is a good preventive measure to take. It will also save the time you may have to spend cleaning after the painting work.
- Surface preparation as per the manufacturer’s instruction
The surface preparation must done exactly as per the manufacturer’s specifications. For example, if you want to apply Royale Aspira Paint from Asian Paints you have to follow the instructions from the manufacturer, Asian Paints. For Example, first, apply cement putty or acrylic putty, then apply Royale Base Coat as a primer. And then 2 Coats of Asian Paints Royale Aspira. It’s best to refer to the technical Data Sheet of the product and follow the instructions mentioned
- Skilled Application
It’s important to get the paint applied by a skilled applicator /painter who is conversant with the application of such paints and is fully aware of all precautions that need to be taken during and after the application of the product. The application is as important as the quality of the paint. Even if you purchase the best quality paint if it’s not applied properly the results would not be satisfactory.
- Check the shade
Before application of the paint on the entire wall one should check the shade by making a small sample on the wall of approximately 1ft x 1ft. This is done to make sure the paint shade supplied is the same as the shade chosen by you. In this way, any discrepancy in the colour can be identified before you start the painting work and corrective measures can be taken.
- Right Dilution
Paint dilution is of primary importance. The paint should thinned with water exactly as per the manufacturer’s instructions. Adding too much or too little water can adversely impact the spreading of the paint on the wall when applied by brush and roller. Too much water could thin the paint to the point that it could lead to a compromised finish. Too little water would leave the paint too thick and it would not spread evenly on the wall when applied.
- Drying Time Between Coats
One should strictly adhere to the drying time that has been mentioned by the paint manufacturer in the technical data sheet. Not keeping enough drying time between coats can lead to poor adhesion of the second coat and prevent you from achieving an optimum finish.
- Cross Check Paint Consumption
After application, it is advised that you measure the painted surface and divide it by the number of liters of paint consumed. This would give you the coverage per litre. So you can compare this to the per-litre coverage specified by the manufacturer. If there is no major discrepancy between the actual coverage and the coverage specified by the manufacturer then you can rest assured that the paint has been applied in a satisfactory manner and without any compromise.
Conclusion
While the idea of tackling an indoor painting project might seem convenient, it’s important to consider the potential drawbacks. Increased humidity, poor ventilation, moisture seepage, difficulty in surface preparation, and limited natural light can all affect the quality and longevity of your painting project. Waiting for dry and less humid weather will ensure optimal conditions for a successful and professional-looking result. Remember, patience and proper planning will go a long way in achieving the desired outcome for your home’s interior painting work. Following the painting checklist and implementing all the points suggested will help you execute your home painting work efficiently, time-bound, and cost-effectively and help you maintain good quality control that will result in great-looking and long-lasting painted walls. It is not just the weather that determines the success of the paint, but also the quality of the paint. Get quality paint from the PaintKart India. To buy online wall paints visit PainKart your online paint shop.
