TRACTOR SHYNE

0 out of 5

Asian Paints Tractor Shyne gives a smooth, shiny finish to the wall. It’s a smart choice if you have been previously using distemper.

Visit Store

Excelsior Paint Store

0 out of 5

Looking for another option click on More Vendor

Key Information

Finish

Low Sheen Smooth

Coverage

130-150 sq.ft/litre/2-coats

Drying Time

Surface Drying Time - 30 Minutes

Coats

Product Description

Description
Usage Instructions

Description

Asian paints Tractor Shyne gives a smooth, shiny finish to the wall. It’s a smart choice if you have been previously using distemper.

Product Benefits:

A Smart Upgrade – Tractor Emulsion Shyne is the perfect way to make a smart upgrade from distempers. It offers the finish of plastic paint, at a cost that is not too different from distemper. it gives higher coverage as compared to
distemper, so you need less material. It also lasts for at least 3 – 4 years, so you don’t have to paint that often.
Sheen Finish – Tractor Emulsion Shyne offers your walls a soft sheen finish, making it the first Economy Emulsion to do so.
Colour – Tractor Emulsion Shyne offers a wide range of shades (1200+). So you can choose your favourite colours for your home.

Usage Instructions

APPLICATION PROCEDURE: –

1. PRE-PAINTING STEPS FOR SURFACE – Plaster, Cleaning, Filling of Cracks and Filling for Holes & Dents.

2. APPLICATION PROCESS – THE APPLICATION PROCESS INVOLVES 7-STEPS: –

Step 1 – Sanding – Sand the surface with sand paper 180 and wipe clean.

Step 2 – Priming the surface with Decoprime Cement Primer (ST/WT) with dilution using MTO in the ratio of 8% to 10% for Cement Primer-ST and dilution with water up to 100% in the case of Cement Primer-WT. Re-coating period is 4-6 hours.

Step 3 – This step involves application of Acrylic Wall Putty with dilution as per the requirement. Recoating period is 4-6 hours.

Step 4 – Sanding – Sand the surface with sand paper 180 and wipe clean.

Step 5 – Priming the surface with Decoprime Cement Primer (ST/WT) with dilution using MTO in the ratio of 8% to 10% for Cement Primer-ST and dilution with water up to 100% in the case of Cement Primer-WT. Re-coating period is 4-6 hours.

Step 6 – Sanding – Sand the surface with sand paper 180 and wipe clean.

Step 7 – This step involves application of 2-coats of Tractor Emulsion Shyne at an interval of 4 hours between coats. It can be diluted with water up to 40-45% for application using Brush/Roller. For Spray application, it can be diluted with water up to 50%-60%.

DRYING TIME – Surface Drying Time is 30 minutes.

COVERAGE – 130 – 150 sq. ft/litre/2-coats.

TOOLS – Brush / Roller / Spray, Putty Knife, Sanding Paper 180.

Product Reviews