TRACTOR SPARC ECONOMY EMULSION
Asian Paints Tractor Sparc economy emulsion is an interior paint that provides value for money to a distemper customer. It gives a smooth finish to your walls.
 Looking for another option click on More Vendor
Key Information
Finish
Coverage
Drying Time
Coats
Product Description
Asian Paints Tractor Sparc economy emulsion is an interior paint that provides value for money to a Distemper customer.
It gives a smooth finish to your walls.
Key Points:-
Perfect Economy Emulsion : Tractor Sparc Economy Emulsion is the easiest way to upgrade from distempers. It offers finish of a plastic paint at a cost very near to distemper. It gives a coverage higher than Distemper, hence requiring less material. It also lasts for at least 2-3 years, so you don’t have to paint that often.
Smooth finish : Tractor Sparc offers your walls a smooth emulsion finish, making it an ideal value for money paint.
APPLICATION PROCEDURE: –
1. PRE-PAINTING STEPS FOR SURFACE – Plaster, Cleaning, Filling of Cracks and Filling for Holes & Dents.
2. APPLICATION PROCESS – THE APPLICATION PROCESS INVOLVES 7-STEPS: –
Step 1 – Sanding – Sand the surface with sand paper 180 and wipe clean.
Step 2 – Priming the surface with Cement Primer (ST/WT) with dilution using MTO in the ratio of 8% to 10% for Cement Primer-ST and dilution with water up to 80% to 100% in the case of Cement Primer-WT. Re-coating period is 4-6 hours.
Step 3 – This step involves application of Acrylic Wall Putty with dilution as per the requirement. Recoating period is 4-6 hours.
Step 4 – Sanding – Sand the surface with sand paper 180 and wipe clean.
Step 5 – Priming the surface with Cement Primer (ST/WT) with dilution using MTO in the ratio of 8% to 10% for Cement Primer-ST and dilution with water up to 80% to 100% in the case of Cement Primer-WT. Re-coating period is 4-6 hours.
Step 6 – Sanding – Sand the surface with sand paper 180 and wipe clean.
Step 7 – This step involves application of 2-coats of Tractor Sparc at an interval of 4 hours between coats. It can be diluted with water up to 40-45% for application using Brush/Roller. For Spray application, it can be diluted with water up to 50-60%.
DRYING TIME –Â Surface Drying Time is 30 minutes.
COVERAGE – 120 – 140 sq. ft/litre/2-coats.
TOOLS – Brush / Roller / Spray, Putty Knife, Sanding Paper 180.
PRECAUTIONS: –
*Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.
*Do not over-thin or over-extend the brush.
*Tint using Asian Paints machine colourants only.
*Stir well and strain before use.
*Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Product Reviews