SmartCare Hydroloc
Asian Paints SmartCare Hydroloc is a one component, ready-to-use, penetrative-cum-film forming
interior waterproofing solution that provides best-in-class solution to interior waterproofing problems
like dampness and efflorescence. It forms a breathable, but water-tight film which doesn’t allow
transport of water and salts to the surface.
Looking for another option click on More Vendor
Key Information
Finish
Coverage
Drying Time
Coats
Product Description
Asian Paints SmartCare Hydroloc is a one component, ready-to-use, penetrative-cum-film forming
interior waterproofing solution that provides best-in-class solution to interior waterproofing problems
like dampness and efflorescence. It forms a breathable, but water-tight film which doesn’t allow
transport of water and salts to the surface.
Key Features:-
1. Warranty : 3 years waterproofing warranty* on Dampness and Efflorescence on plaster surfaces.
2. Waterproofing : Resists up to 4 bars of negative hydrostatic pressure (ASTM D7088).
3. Anti-efflorescence : Provides long-lasting protection from efflorescence.
4. High Moisture Resistance : Applicable up to 70% substrate moisture**
5. Hassle-free and Easy to Use : Unique, one component, ready-to-use, brushable product.
6. Penetrative Coating : Penetrating additive imparts water repellency to porous construction materials.
7. Pore Blocking : Pore blocking additive blocks water transport within the substrate.
8. Adhesion : Excellent adhesion with cementitious substrate.
Application of SmartCare Hydro Loc:
Surface Preparation:
• Surface under treatment should be firm and strong, clean and free from oil or any loosely held plaster/powder. For weak and crumbling surface, replastering is recommended. Masonry surface should be fully cured prior to application.
• On existing efflorescence surface, clean with efflorescence cleaner as per the instruction provided for its usage or by wire brushing followed by thorough water washing.
• Surface cracks (< 3mm) and large pores or dents must be filled with SmartCare Crack Seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.
• Wash the surface thoroughly using water and a strong brush. Remove all loosely bound sand particles, instant lime, POP, black spots, fungus, moss on moisture captured walls and any poorly adhering painted surface.
• Surface should be in SSD condition prior to the application of Smartcare Hydroloc.
Application Method:
If the Surface is damaged with dampness and/or Efflorescence, follow the below process-
• Prepare the surface as per the above guidelines.
.• Existing putty to be removed till plaster level from skirting to the affected area covering an additional 1-ft distance across all sides of affected area.
• Smartcare Hydroloc is recommended to be applied on plaster by brush ensuring material goes inside the pores/interstices.
• Apply first coat of Smartcare Hydroloc (no dilution) with a forced coverage of 40-45 sq.ft/ltr from skirting to the affected area, covering an additional 1-ft distance across all sides of affected area. Allow it to dry for 6-8 hrs.
• Apply 2nd Coat of Smartcare Hydroloc (no dilution) with coverage of 40-45 sq.ft/ltr perpendicular to first coat. Allow it to dry for 6-8 hrs.
• Apply 2-coats of Asian Paints TruCare Wall Putty or Asian Paints Trucare Acrylic Wall Putty or Asian Paints Smart Care WaterProofing Putty over Smartcare Hydroloc. Allow it to dry for 6-8 hrs. Sand with sand paper 180. Wipe clean and paint over it as per regular painting practices.
If the surface is in good condition (without Dampness and any visible Efflorescence)-
• Existing putty to be removed till plaster level from skirting to the affected area covering an additional 1-ft distance across all sides of affected area.
• Apply a single coat of Smartcare Hydroloc (no dilution), with a forced coverage of not more than 40 – 45 sq. ft/ litre. Allow it to dry for 6-8 hrs.
• Apply two coats of Asian Paints TruCare Wall Putty or Asian Paints Trucare Acrylic Wall Putty or Asian Paints Smart Care WaterProofing Putty over SmartCare Hydroloc. Allow it to dry for 4-6 hrs. Sand with sand paper 180. Wipe clean and paint over it as per regular painting practices.
Product Reviews